Design & Reuse
835 IP
751
0.0
Low Power 30mA 10Ghz BW capless IP Core
A 30mA 10GHz BW capless LDO (Low Drop-Out) is a type of voltage regulator that is designed to provide a stable output voltage with a low voltage drop ...
752
0.0
Low Power 5V - > 1.8V Cap-less LDO IP Core
A 5V -> 1.8V low-power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 1.8 volts from a 5-volt input ...
753
0.0
Low Power 5V->2.4V Low noise LDO IP core
A 5V -> 2.4V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 2.4 volts from a 5-volt input ...
754
0.0
Low Power 5V->3.0V Cap-less LDO IP Core
A 5V -> 3.3V low power LDO (Low Drop-Out) is a type of voltage regulator designed to provide a stable output voltage of 3.3 volts from a 5 volt input ...
755
0.0
Low Quiescent DC/DC Buck Converter in TSMC 22ULL
Low-quiescent DC/DC buck converter in TSMC 22ULL supporting an 1.62 V to 3.63 V input voltage range with low quiescent current and high efficiency at ...
756
0.0
Low Quiescent DC/DC Buck Converter in TSMC 22ULL
Low-quiescent DC/DC buck converter in TSMC 22ULL supporting an 1.62 V to 3.63 V input voltage range with low quiescent current and high efficiency at ...
757
0.0
Low-Area DC/DC Buck Converter
Low-area DC/DC buck converter for battery-powered IoT applications....
758
0.0
Low-leakage LDO in TSMC 22ULL supporting up to 3.63 V input voltage
High-performance LDO regulator to supply noise-sensitive active domains from input voltage up to 3.63 V....
759
0.0
Low-leakage LDO in TSMC 22ULL supporting up to 3.63 V input voltage
LDO regulator in TSMC 22ULL to supply logic and sensitive domains from input voltage up to 3.63 V...
760
0.0
Low-Noise Bandgap Reference - Low Noise: 63nV/√Hz, PSRR: -80dB TSMC 0.18μm CMOS (CLM18)
This macro-cell is a low noise, high PSRR voltage reference core designed for TSMC 0.18μm (CLM18) CMOS technology. The core is ideal for applications ...
761
0.0
Low-noise Regulator for VCO 1V to 0.8V
Noise @ 1MHz offset=2.5nV/Sqrt(Hz), IDD=12mA...
762
0.0
Low-Power Bandgap Reference - Low Integrated Noise (62.5µVrms) in TSMC 40nm
This macro-cell is a low power voltage reference generator core designed for TSMC 40nm CRN40LP CMOS technology. The core is ideal as a general purpose...
763
0.0
Low-power Power-On-reset design in Samsung Foundries 65nm LFR6LP process
The POR-[1.8-5.5]-[0.9-1.4].01 is a Power-On-Reset designed in Samsung Foundries 65nm LFR6LP process nodes. It is used to monitor AVD and VDD supplie...
764
0.0
Low-quiescent DC/DC converter in TSMC 22ULL
Low-quiescent DC/DC converter in TSMC 22ULL 2.5 V process with high efficiency at light load....
765
0.0
Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V
Low-quiescent LDO voltage regulator in TSMC 22ULL 1.8V...
766
0.0
Power controller - MAESTRO
Maestro is a unique Power Controller RTL IP that features breakthrough capabilities compared to traditional HW or SW PMU design methodologies. It comb...
767
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source, reference current sources and reference frequency generator. Bandgap source fo...
768
0.0
Power Management Unit
PMU is designed to supply integrated circuits with stable and precise voltage. 055UMC_PMU_01 is a library including RS block and 4 LDOs: LDO1 to suppl...
769
0.0
Power Management Unit
PMU IP includes following components: Bandgap reference voltage source and reference current sources. Bandgap source forms temperature, power supply a...
770
0.0
Power Management Unit
250iHP_PMU_05 is power management system, which consists of two parts – Bandgap and 4 LDOs. Bandgap reference voltage source forms temperature and pow...
771
0.0
Power Management Unit
250iHP_PMU_03 is power management system, which divided in primary unit and up to three secondary units. Primary unit includes bandgap reference volta...
772
0.0
Power management unit
PMU is designed to supply embedded integrated circuits with stable and precise voltage and 1%-accurate clock frequency. It integrates 4 LDOs and 3 osc...
773
0.0
Power management unit (0.9V, 1.8V, 3.3V output voltages, 1.2V reference voltage and 10uA/1uA reference currents)
028TSMC_LDO_01 is a Power management unit, designed to supply integrated circuits with stable and precise voltage. IP includes Bandgap block, and 3 LD...
774
0.0
Power Management Unit (1.1 - 1.4V output voltage, load current 5 mA)
055TSMC_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit Status). The block has configurable output voltage (1.1/1.2/1.3...
775
0.0
Power management unit (1.2 V output voltage, 945 nA output current)
065TSMC_PMU_01 is designed to supply embedded integrated circuits with stable and precise internal voltage and currents. It integrates power switch el...
776
0.0
Power Management Unit (2.3 - 3.0V output voltage, load current 20mA)
130iHP_PMU_01 is designed to form stabilized voltage with overcurrent indication (bit OVC). The block has configurable output voltage (2.3 / 2.4 / 2.5...
777
0.0
Power on Reset
065TSMC_PoR_02 is a Power-on-Reset (PoR) circuit provides a reset signal to the chip when supply voltage reach required level. The block generates res...
778
0.0
POWER ON RESET FOR 1.8V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
779
0.0
POWER ON RESET FOR 3.3V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
780
0.0
POWER ON RESET FOR 5V SUPPLY
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
781
0.0
POWER ON RESET FOR DUAL SUPPLY SYSTEMS
The power-on-reset(POR) generates a reset pulse to ensure that the core processing circuits are in a defined state when the power is ramping up or ram...
782
0.0
Power on Reset IP, Input: 1.2V, UMC 0.13um HS/FSG process
Vrr=0.8V Vfr=0.65V, VCC=1.2V, Ivcc=12.7uA, HS process with B-type IO., Power On Reset, UMC 0.13um HS/FSG Logic process....
783
0.0
Power on Reset with detector
The block consists of voltage detector, power on reset and NOR3 gate. The voltage detector is a comparator that compares input voltage with reference...
784
0.0
Power-on Reset
IP 250iHP_PoR_01 is power-on reset unit which produces a reset signal after rising supply voltage to produce the initial state of the triggers. The bl...
785
0.0
Power-On Reset - Flexible Threshold (1­-1.3V), Ultra Low Current (100nA) Silterra 0.18 μm
This macro-cell is an ultra low consumption Power-On Reset (POR) core designed for SilTerra 0.18µm CL180G CMOS technology. The threshold sensing volta...
786
0.0
Power-On Reset - Threshold (1.6V­1.8V), Low Current (1.5µA) Silterra 0.18 μm
This macro-cell is a low consumption Power-On Reset (POR) core designed for SilTerra 0.18µm CL180GH5 5V CMOS technology. The threshold sensing voltage...
787
0.0
Power-On-Reset and Brown-Out-Reset in TSMC 22ULL
Power-On-Reset and Brown-Out-Reset in TSMC 22ULL...
788
0.0
Precision Power-on Reset Generator
The Silicon Creations 3-Supply Power-On Reset circuit provides a fi?xed width reset pulse for chip initialization after power up. The design senses th...
789
0.0
Programmable LDO voltage regulator (output voltage 1.6 to 2.2 V)
The regulator stabilizes the external voltage (supply voltage) and forms an output level of the specified value. Adjustment is carried out by positive...
790
0.0
Programmable LDO voltage regulator (output voltage 2.5 V to 2.7 V)
The voltage regulator consists of differential amplifier which compares reference voltage with voltage from feedback divider. It adjusts the impedance...
791
0.0
Programmable LDO voltage regulator (output voltage 2.5 V to 2.7 V)
The voltage regulator consists of differential amplifier which compares reference voltage with voltage from feedback divider. It adjusts the impedance...
792
0.0
Programmable LDO voltage regulator (output voltage 2.5 V to 2.7 V)
The voltage regulator consists of differential amplifier which compares reference voltage with voltage from feedback divider. It adjusts the impedance...
793
0.0
TSMC 12 FFC Capless Low-Dropout Regulator_CLDO
The ARKT12FFC_CLDO belongs to a family of low dropout (LDO), CLDO : Capless Low-Dropout Regulator The ARKT12FFC_CLDO is a voltage regulator IP wi...
794
0.0
TSMC 12 FFC Capless Low-Dropout Regulator_CLDO (100mA)
The ARKT12FFC_CLDO100mA belongs to a family of low dropout (LDO), CLDO : Capless Low-Dropout Regulator The ARKT12FFC_CLDO100mA is a voltage regul...
795
0.0
TSMC 12 FFC Capless Low-Dropout Regulator_CLDO (200mA)
The ARKT12FFC_CLDO200mA belongs to a family of low dropout (LDO), CLDO : Capless Low-Dropout Regulator The ARKT12FFC_CLDO200mA is a voltage regul...
796
0.0
TSMC 12 FFC Capless Low-Dropout Regulator_CLDO (300mA)
The ARKT12FFC_CLDO300mA belongs to a family of low dropout (LDO), CLDO : Capless Low-Dropout Regulator The ARKT12FFC_CLDO300mA is a voltage regul...
797
0.0
TSMC 12 FFC Low Dropout Regulator_LDO
The ARKT12FFC_LDO belongs to a family of low dropout (LDO) LDO : Low-Dropout Regulator The ARKT12FFC_LDO is a voltage regulator IP with enable act...
798
0.0
TSMC 12 FFC Low Dropout Regulator_LDO (100mA)
The ARKT12FFC_LDO100mA belongs to a family of low dropout (LDO) LDO : Low-Dropout Regulator The ARKT12FFC_LDO100mA is a voltage regulator IP with ...
799
0.0
TSMC 12 FFC Low Dropout Regulator_LDO (200mA)
The ARKT12FFC_LDO200mA belongs to a family of low dropout (LDO), LDO : Low-Dropout Regulator The ARKT12FFC_LDO200mA is a voltage regulator IP wit...
800
0.0
TSMC 12 FFC Low Dropout Regulator_LDO (300mA)
The ARKT12FFC_LDO300mA belongs to a family of low dropout (LDO). LDO : Low-Dropout Regulator The ARKT12FFC_LDO300mA is a voltage regulator IP with...